{{ b.text }}
{{ b.text }}
{{ b.text }}
- {{ it.text }}
| {{ h.v }} |
|---|
| {{ c.v }} |
Dew point — something that you forget when you buy a compressor. We're going to see which dryer your pneumosystem needs and why marriage grows without it.
Compressing air, the compressor concentrates on moisture — and without drying, it falls condensate in the highway, instrument and product. The drain removes the water to the right dew point. The only question is how deep it needs to be removed.
Pressure dew point — The temperature at which condensate begins to fall out of compressed air. The lower it is, the more dry air. For a plus temperature plant, +3 °C, for street roads in winter or responsible processes, a minus dew point before -40 °C and lower.
Cools the air and wetting the moisture, providing a dew point of about +3 °C. Simple, economical, covers most of the tasks of general industrial pneumatic. It doesn't fit where the air is freezing or when it's very dry.
It's leaking air through adsorbent granulars that absorb moisture and giving dew point to -40... -70 °C. Need street tracks, pneumatic, paint, food and pharmaceutical industries. It's expensive and it spends part of the air on regeneration, but it gives you stable dry air.
Water in the air — It's the corrosion of the instrument, the defects in paint, the breakdown of the pneumatic car and the freezing of the highway in winter. The dryer cost is not comparable to the losses of these problems.
Name the task and conditions — We'll pick up the dryer and filter the right class.